The parameters of IS420UCSBH1A are as follows:
Hardware Parameters
Processor: Intel 600MHz EP80579.
Memory: 256MB DDR2 SDRAM with error correction code, flash-supported SRAM, and 2GB of NAND flash memory.
Dimensions and Weight: It is small in size and weighs approximately 2.4 pounds.
Processor: Intel 600MHz EP80579.
Memory: 256MB DDR2 SDRAM with error correction code, flash-supported SRAM, and 2GB of NAND flash memory.
Dimensions and Weight: It is small in size and weighs approximately 2.4 pounds.
Electrical Parameters
Power Supply: The minimum voltage is 18V DC, the maximum voltage is 30V DC, the rated power is at 24V and 28V DC, and the maximum rated current is 1.5A DC.
Power Consumption: The rated current consumption is below 34mA.
Power Supply: The minimum voltage is 18V DC, the maximum voltage is 30V DC, the rated power is at 24V and 28V DC, and the maximum rated current is 1.5A DC.
Power Consumption: The rated current consumption is below 34mA.
Environmental Parameters
Temperature: The operating temperature range is from -22°F to 149°F (-30°C to 65°C). The storage temperature range is not mentioned but generally adapts to the conventional temperature range of the industrial environment.
Humidity: The relative humidity is 35% to 85% RH (without condensation).
Protection Rating: The enclosure protection level is IEC: IP67 / NEMA: 4A, 6, 12 / DIN: IP69K.
Interference Resistance: Up to 2 devices (using the automatic differential frequency function).
Seismic Resistance: 10 to 55Hz, double amplitude of 1.5mm, for 2 hours in each of the X, Y, and Z directions.
Shock Resistance: 1,000m/s², 6 times in each of the X, Y, and Z directions.
Temperature: The operating temperature range is from -22°F to 149°F (-30°C to 65°C). The storage temperature range is not mentioned but generally adapts to the conventional temperature range of the industrial environment.
Humidity: The relative humidity is 35% to 85% RH (without condensation).
Protection Rating: The enclosure protection level is IEC: IP67 / NEMA: 4A, 6, 12 / DIN: IP69K.
Interference Resistance: Up to 2 devices (using the automatic differential frequency function).
Seismic Resistance: 10 to 55Hz, double amplitude of 1.5mm, for 2 hours in each of the X, Y, and Z directions.
Shock Resistance: 1,000m/s², 6 times in each of the X, Y, and Z directions.
Performance Parameters
Signal Processing: It has powerful signal processing capabilities and can perform operations such as filtering, amplifying, digitizing, and calibrating the collected data to ensure the accuracy and reliability of the data.
Input and Output Channels: It supports multiple input channels and can simultaneously monitor and collect multiple digital input signals. It has high-precision signal sampling capabilities, can receive analog or digital input signals, and control the output of actuators or other devices.
Communication Interfaces: It is equipped with standard communication interfaces such as RS-485, Ethernet, or Profibus, and supports common industrial communication protocols (such as Modbus).
Signal Processing: It has powerful signal processing capabilities and can perform operations such as filtering, amplifying, digitizing, and calibrating the collected data to ensure the accuracy and reliability of the data.
Input and Output Channels: It supports multiple input channels and can simultaneously monitor and collect multiple digital input signals. It has high-precision signal sampling capabilities, can receive analog or digital input signals, and control the output of actuators or other devices.
Communication Interfaces: It is equipped with standard communication interfaces such as RS-485, Ethernet, or Profibus, and supports common industrial communication protocols (such as Modbus).
Functional Parameters
Software Operation: It comes pre-installed with specific application software, can run ladders or blocks, and can make minor changes to the control software online without restarting the system.
Clock Synchronization: Using the QNX Neutrino operating system, the clocks of I/O components and the controller can be synchronized within 100 microseconds through the IEEE 1588 protocol.
Software Operation: It comes pre-installed with specific application software, can run ladders or blocks, and can make minor changes to the control software online without restarting the system.
Clock Synchronization: Using the QNX Neutrino operating system, the clocks of I/O components and the controller can be synchronized within 100 microseconds through the IEEE 1588 protocol.
There are no reviews yet.