FANUC A06B-2272-B200 servo motor

FANUC A06B-2272-B200 servo motor introduction

1. Basic information

Brand: FANUC
Model: A06B-2272-B200
Type: Servo motor
Second, technical specifications and characteristics

Power parameters:
The power parameters of FANUC servo motors are usually expressed in kilowatts (kW), but the specific power values are not mentioned in the reference article for the A06B-2272-B200 model.
Rated speed:
The rated speed of FANUC servo motor refers to the maximum speed at which the motor can operate at rated voltage and current. The specific speed rating of the A06B-2272-B200 is not mentioned in the reference article.
Rated voltage and current:
The rated voltage and current of FANUC servo motors are the key parameters required for motor operation. Rated voltage is usually expressed in volts (V) and rated current is expressed in amperes (A). The specific value of A06B-2272-B200 is not mentioned in detail in the reference article.
Rated torque:
The rated torque of the FANUC servo motor refers to the maximum torque that the motor can provide at the rated current, usually expressed in Newtons · meters (Nm). The specific torque rating of the A06B-2272-B200 is not mentioned in the reference article.
Envelope size and shaft diameter:
The envelope size refers to the size of the motor shape, generally expressed in millimeters (mm). Shaft diameter refers to the diameter of the motor output shaft, which is also an important parameter for motor installation and interface selection. The specific envelope dimensions and axle diameter values of A06B-2272-B200 are not mentioned in the reference article.
Acceleration:
The acceleration of a FANUC servo motor refers to the ability of the motor to change its torque and speed per unit time, usually expressed in units per second squared (m/s^2). The specific acceleration values of A06B-2272-B200 are not mentioned in the reference article.
Support communication protocol:
FANUC servo motors usually support a variety of communication protocols, such as FANUC servo protocol, EtherNet/IP, Modbus, etc. This enables the motor to be linked to the upper equipment for control and data transmission. The specific communication protocols supported by A06B-2272-B200 are not explicitly mentioned in the reference article.
Accessories Accessories:
When using FANUC servo motors, a variety of accessories can be selected, such as encoders, brakes, temperature sensors, etc., for more precise motion control and fault protection. Accessories available for the A06B-2272-B200 are not mentioned in the reference article.
3. Application fields

FANUC servo motors are widely used in areas requiring high-precision control and automation, such as machine tools, textile machinery, electronic manufacturing equipment, medical equipment, printing machinery, automated production lines, etc. The specific application areas of A06B-2272-B200 are not mentioned in the reference article, but according to the generality of the servo motor, it can be inferred that it is suitable for the above fields.
Summary: FANUC A06B-2272-B200 is a high performance servo motor with a wide range of application prospects. However, for its specific technical specifications and parameters, it is necessary to refer to more detailed official information or technical manuals.