FANUC A06B-6114-H209 Driver controller

FANUC A06B-6114-H209 Driver Controller This section describes the driver controller

I. Product overview

The FANUC A06B-6114-H209 is a servo drive controller designed to control the operation of servo motors. It is an important part of modern motion control system, and is widely used in industrial robots, CNC machining centers and other automation equipment.

Second, technical characteristics

Control mode:
The drive controller supports a variety of control methods, including position control, torque control and speed control.
The position control mode usually determines the rotation speed and Angle of the motor by the frequency and number of pulses input from the outside.
The torque control mode sets the output torque of the motor shaft through the input of external analog quantity or direct address assignment.
The speed control mode directly controls the motor speed.
Network communication:
The A06B-6114-H209 driver controller supports a variety of communication protocols, such as Profibus DP, and can easily exchange data with other devices.
Dual optical ports are used to implement the redundancy function of the dual-fiber ring network. When an optical fiber fails, the system can rebuild the network link within 10ms to ensure communication reliability.
Performance index:
The data electrical interface supports a variety of communication rates, including 9.6kBit/s to 12MBit/s.
The optical fiber interface supports multi-mode and single-mode optical fibers with a transmission distance of up to 20Km.
With lightning protection, overcurrent protection and surge protection.