FANUC A06B-2041-B605 servo motor

Basic information:
Model: A06B-2041-B605
Type: Servo motor
Technical specifications:
Maximum current: less than 1mAdc
Operating temperature: -30°C to +65°C
Storage temperature: -40°C to +85°C
Humidity: 95%, non-condensing
Energy consumption: Typical value is 7.7 watts
Standard I/O: 10 kΩ
Radial vibration and eccentricity: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil) (where both have the same data and may be duplications or different units describing similar indicators)
Common causes of system failures:
Power systems and communication network systems are the most prone to failure. Power supply in continuous operation, heat dissipation, voltage and current fluctuations impact is inevitable.
Communication and network are subject to external interference, and the external environment is one of the biggest factors that cause the failure of communication external equipment.
The damage of the system bus is mainly due to the fact that the PLC is mostly a plug-in structure, and the long-term use of the pluggable module will cause the bus damage at the local printing board or the bottom plate and the connector interface. In addition, the influence of air temperature changes, humidity changes, plastic aging of the bus, aging of the printed line, oxidation of the contact point, etc., are all reasons for the system bus loss.