EPRO PR6423/003-010+CON021 vibrating sensor

The EPRO PR6423/003-010+CON021 Vibration sensor is a device for monitoring and measurement, the following are some detailed parameters and characteristics of the sensor:

Sensitivity/linearity:
Sensitivity/linearity may be similar to the PR6423/010-010+CON021 model, specifically 8 V/mm (203.2 mV/mil) ≤±1%, but the exact value may vary from model to model.
Air gap (center) nominal value:
For the PR6423/010-010+CON021 model, the nominal value of the air gap is about 1.5 mm (0.06 in), but the exact value of the PR6423/003-010+CON021 may vary.
Scope:
The static range may be ±1 mm (0.040 in) and the dynamic range may be 0 to 500μm (0 to 0.020 “). Note, however, that these ranges may vary by specific model and application.
Target material/Surface material:
Suitable for ferromagnetic steel (e.g. 42 Cr Mo4 standard).
Maximum surface velocity:
It can be as high as 2500 m/s (98425 ips), but the exact number depends on the application and environment.
Shaft diameter:
The shaft diameter should be ≥25 mm to ensure that the sensor can be properly installed and measured.
Operating temperature range:
For sensors and cables, the operating temperature range may be -35 to 200°C (-31 to 392°F). Specific values may vary by model and configuration.
Voltage resistance:
The sensor head may be able to withstand pressure, but specific pressure values (such as 10,000 hpa or 145 psi) may vary from model to model.
Shock and vibration:
The sensor may be able to withstand shock and vibration at 5g@60 Hz@25°C (77°F).
Installation and connection:
Installation may involve the use of rigid vibration-free supports with mounting threads and the use of retaining nuts such as 15 nm for the PR 6423.
Connections may be made using a Transduer self-locking lemon plug or other appropriate cable interface.
Power Supply and output:
The supply voltage range may be -23V to -32V, but the exact value may vary by model and application.
The output signal and range may depend on the configuration and use of an extended range converter (such as the CON021/91xxxx series).
Weight and housing:
The weight may be about 100 grams (depending on whether cables and armouring are included).
The housing material may be stainless steel and teflon.