EPRO PR6423/002-030-CN+CON021 presensor

The EPRO PR6423/002-030-CN+CON021 Eddy current sensor system is a high performance non-contact measuring device for the displacement, velocity and vibration monitoring of metal targets. The following is a detailed description of the sensor:

Basic information
Brand: EPRO
Model: PR6423/002-030-CN + CON021
Type: Eddy current sensor system
Technical characteristics
Non-contact measurement: The sensor uses the eddy current principle to measure the motion state of the metal target through electromagnetic induction, without direct contact with the object to be measured, avoiding wear and interference.
High precision: The sensor uses advanced signal processing technology and algorithms to accurately capture the motion signal of the metal target and convert it into a readable electrical signal output.
Fast response: The sensor has fast response ability and can reflect the motion state of the measured object in real time.
Multi-function: It is suitable for non-contact measurement of static and dynamic displacement, such as axial and radial displacement, shaft eccentricity, shaft vibration, etc.
Main technical parameters
Measuring range: 1mm to 20mm (the specific range may vary depending on the model and configuration).
Cable options: The end of the cable can choose self-locking waterproof connector or bare wire mode; Cables can be armoured or unarmoured; The cable can be configured with or without connectors.
Applicable temperature: -35°C to +380°C.
Protection level: can be used in the need of explosion-proof environment, explosion-proof level can reach Eex ib IIC T6/T4.
Application field
Industrial automation: used to monitor and control the operation of various turbomachinery, compressors, fans and other equipment.
Machine building: Used to measure and monitor the movement and vibration of key components during machine building.
Aerospace: In the aerospace field, it is used to monitor the operating status of aircraft engines, turbines and other equipment.
Installation and use
Mounting: The sensor is equipped with mounting thread or rectangular mounting flange, which is convenient for users to install according to actual requirements.
Use: The user only needs to adjust the air gap between the sensor and the measuring surface to get the desired signal from the output of the preprocessor (CON021). Since linear calibration has been carried out before leaving the factory, no further calibration is required during installation.
Meet the standard
The sensors are manufactured and used in accordance with a variety of international common standards such as API 670, DIN 45670 and ISO 10817-1.