ABB PP882 3BSE069275R1 Control module

In stock

Input/Output Characteristics

Digital Inputs: There may be several digital input channels available. The input voltage levels are typically designed to conform to common industrial standards, such as 24V DC for logic level detection. The number of digital input channels could vary, but might commonly be in the range of 8 to 16 or more depending on the specific configuration.
Digital Outputs: It also has a number of digital output channels. The output can drive loads like relays, solenoid valves, etc. The output current capacity for each channel is usually sufficient to handle typical small to medium-sized industrial loads. The number of digital output channels could be similar to that of the digital inputs, typically ranging from 8 to 16 or so.
Analog Inputs: Some models may include analog input channels to receive continuous signals from sensors like temperature sensors, pressure sensors, etc. The analog input range might cover common industrial signal ranges like 0 – 10V DC or 4 – 20mA. The number of analog input channels might be around 4 to 8.
Analog Outputs: Analog output channels can be used to send control signals to actuators such as variable frequency drives or proportional valves. The output signal range is usually consistent with the common analog input requirements of other devices, such as 0 – 10V DC or 4 – 20mA. The number of analog output channels is generally fewer than the digital ones, perhaps around 2 to 4.

Tags: ABB PP882 3BSE069275R1

he ABB PP882 3BSE069275R1 is a module with the following typical parameters and features:

General Information

Product Type: It belongs to a certain type of control module within ABB’s product range, often used in industrial automation systems for various control and monitoring tasks.

Communication Capabilities

Communication Interfaces: It is usually equipped with multiple communication interfaces to enable seamless connection with other devices in the automation system. For example, it may support protocols like Profibus, Modbus, or Ethernet-based communication protocols to exchange data with programmable logic controllers (PLCs), human-machine interfaces (HMIs), and other intelligent devices.

Input/Output Characteristics

Digital Inputs: There may be several digital input channels available. The input voltage levels are typically designed to conform to common industrial standards, such as 24V DC for logic level detection. The number of digital input channels could vary, but might commonly be in the range of 8 to 16 or more depending on the specific configuration.
Digital Outputs: It also has a number of digital output channels. The output can drive loads like relays, solenoid valves, etc. The output current capacity for each channel is usually sufficient to handle typical small to medium-sized industrial loads. The number of digital output channels could be similar to that of the digital inputs, typically ranging from 8 to 16 or so.
Analog Inputs: Some models may include analog input channels to receive continuous signals from sensors like temperature sensors, pressure sensors, etc. The analog input range might cover common industrial signal ranges like 0 – 10V DC or 4 – 20mA. The number of analog input channels might be around 4 to 8.
Analog Outputs: Analog output channels can be used to send control signals to actuators such as variable frequency drives or proportional valves. The output signal range is usually consistent with the common analog input requirements of other devices, such as 0 – 10V DC or 4 – 20mA. The number of analog output channels is generally fewer than the digital ones, perhaps around 2 to 4.

Operating Conditions

Temperature Range: It can operate within a certain temperature range, typically from around -20°C to +60°C. This allows it to be used in a variety of industrial environments, both indoors and outdoors under normal climate conditions.
Humidity Range: It can tolerate a relative humidity range from around 5% to 95% without condensation, ensuring stable operation in different humidity levels commonly encountered in industrial settings.

Power Requirements

Supply Voltage: It usually operates with a specific supply voltage, often a standard industrial voltage like 24V DC or 220V AC depending on the model and application requirements.

It should be noted that the actual parameters may vary depending on the specific application and customization of the module. For the most accurate and detailed information, it is recommended to refer to the official product documentation provided by ABB.

Show More Show Less